Gossen MAVOLUX 5032 C BASE User Manual download pdf (Page 35)

GOSSEN Foto- und Lichtmesstechnik GmbH 11

3 MAVOLUX Operation

3.1 Switch On – Make Measurement

Press down the on/off key and the MAVOLUX will start up in measuring mode and will immediately

be measuring at 2 times per second. The instrument is in the function „AUTO“, i.e. the MAVOLUX will

select the best suited measuring range for the existing light level. By pressing one of the range keys,

one of the measuring ranges can be set. Scrolling up or down through additional measuring ranges is

accomplished by briefly pressing one of the range keys. If both keys are pressed and held

simultaneously, the instrument is returned to „AUTO RANGING“.

3.2 Selecting Measurement Unit lx or fc

Use the key lx/fc to select the required unit for the read-out – lux or footcandle.

3.3 Overload and Zero Point Indication

When exceeding one of the measuring ranges „OL“ (Overload)

appears in the display.

The zero point indication may be achieved by putting the protective

cap over the light collector of the photometer head.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

No comments

Gossen MAVOLUX 5032 C BASE User Manual Page 35