Gossen R2600 User Manual download pdf (Page 26)

GOSSEN METRAWATT GMBH 26

4.1.2 Unit of the temperature parameters

The unit of the temperature parameters depends upon

– the range marking B1 ... B5 of the equipment (see PI = 33h),

– the configured sensor type (see PI = 33h) and

– the configured unit of the sensor (see PI = 32h).

With standard signal (B2, B5) and Pt100 with 0.1° display, the decimal point only serves for the display on the R26900/01, not for the parameter val-

ues. That is, a value of 234.5 in the display, for example, is to be transmitted as 2345 = 0929. The two characters of the data block then are 29h, 09h.

Marking

Sensor type

0 ... 7 8

B1, B3, B4 1°C / 1°F 0.1°C / 0.1°F

B2, B5 1, 0.1, 0.01, 0.001

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 39 40

R2600 / R2601 1
DIN Draft 19244 Interface 1
1 General 4
1.3.1 RS-232 connection 5
1.4 Principal function 6
1.5 Time action 7
2 Telegram structure 8
2.2 Control set 9
2.3 Long set 10
2.4.1 Equipment address 11
2.4.2 Function field (FF) 11
2.4.3 Parameter index (PI) 13
3 Telegram contents R2600/01 15
3.3 Request for cycle data 16
3.4 Request for event data 17
3.6 Send data to R2600/01 22
4.1 Temperature parameters 24
4.2 Control parameters 28
4.3 Control instructions 29
4.4 Equipment specifications 32
4.5 Heating current monitor 37
5 Storage operations 38
5.2 Send a record 39

Comments to this Manuals

No comments

Gossen R2600 User Manual Page 26

Comments to this Manuals