Gossen IPP 144 - 40 GE User Manual download pdf (Page 27)

INTERFACE

INTERVAL

SERIAL:

This sets the printer for data transmission via serial

interface.

EMUL.EPS.LQ580 ESC/P2:

This sets the printer for data transmission via EPSON

LQ580 ESC/P2 protocol.

EMUL.TALLY T2024:

This sets the printer for data transmission via TALLY T2024

protocol.

It is possible to print graphics, such as bmp-, jpg- or tif-,

directly from WINDOWS

programs.

Set the printer INTERFACE of EMUL.EPS.LQ580 ESC/P2

or EMUL.TALLY T2024. Use a 24-pin type WINDOWS

printer. The following configurations have been verified:

INTERFACE: EMUL.EPS.LQ580 ESC/P2

WINDOWS® printer driver: Epson Compatible 24 PIN and

Epson LQ560

Details:

If the width of the graphic exceeds the paper print width,

then the excess is discarded. It is recommended to use the

auto-sizing print option in WiNDOWS® programs, where

possible.

The printing of measuring values can be carried out under

internal timer control.

Setting range: 10 s ... 24 h in steps of 10 s.

The interval of starts after the printing of the line received

last.

 For more information see chapter 7.3. „Handshake

Messages“ !

Print graphics

directly from

WINDOWS

BAUDRATE

6.2. Serial Interfaces

There areten options available:

110; 150; 300; 600; 1200; 2400; 4800; 9600; 19200 and

38400 baud.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 63 64

No comments

Gossen IPP 144 - 40 GE User Manual Page 27